Submersible Slurry Pump with Agitator

Electric Submersible Slurry Pump With Agitator

Advantage:

1, Everflowing NJQ series submersible slurry pumps have self mixing agitating fuction.

Besides the main impeller, there is the agitation impeller which can agitate the sludge deposited on the water bottom into turbulent flow and pump the sand out.

2.Impeller is closed type impeller or open impeller.

3.All wear parts are made of high wear abrasive chrome alloy.

4.The motor is anti over-loaded motor with water-proof function.

5.No limited by suction lift.

6. If the sand is compacted, side agitator or jet ring can be added to  agitate and increase the medium concentration.

Service conditions Parameter
1.The power source is  three-phase alternating-current supply, and the capacity of the substation transformator is two to three times of the rated capacity of the motor.

Power source can be ordered to design to match different frequency&voltage of different country/location or under your request.

2.The temperature of the medium cannot exceed 60 Celsius,If temperature is higher than 60 Celsius,jacket can be added to cooling  by water.The medium does not contain inflammable or explosive gases.

3.The maximum weight concentration of the solid particles in the medium: the maximum weight concentration of the ash is 45% and the maximum weight concentration of the slag is 60%.

4.The submerged depth of the unit is not more than 30 meters, and not less than 1 meter.

5.The unit works in the medium vertically, and the working status is continuous.